Cda HCG 731 Manual de usuario

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00

10FCFig. 8Fig. 7Burners and Grids– These parts can be removed and cleaned with appropriate products.– After cleaning, the burners and their flame sprea

11Correct Position of Triple Ring BurnerThe triple ring burner must be correctly positioned (see fig. 9); the burner ribs must be fitted in their hous

12TIPS FOR INSTALLATIONLocation– The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space contain

13InstallationTechnical Information for the InstallerIn order to install the hob into the kitchen fixture, a hole with the dimensions shown in fig. 12 h

14Applying the Seals– Turn the cooktop upside down.– Spread the longer seal “A” around the left, rear and right sides as shown in figure 15a.– With a c

15Fastening the Installation Brackets Each cooktop is provided with an installation kit including brackets and screws for fastening the top to fixture

16Gas Supply RequirementsImportant Note This appliance is supplied for use on NATURAL GAS or LPG (check the gas regulation label attached on the appli

17Gas ConnectionThe installation of the gas appliance to Natural Gas or LP Gas must be carried out by a suitably qualified and regist

18Gas connection Cat: II 2H3+The fitting (fig. 17) is made up of:– 1 nut “A”– 1 elbow fitting “C”– gasket “F”Connection to the Gas Supply– Be care

19Conversion to Natural Gas or LPGReplacing the Burner InjectorsIf the NATURAL GAS/LPG conversion kit is not supplied with the appliance this kit can

2ImportantThis appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domest

20Regulating the Burner Minimum Setting When changing from one type of gas to another, the minimum tap output must also be correct, considering that i

21Mains Electricity ConnectionIncorrect installation may be dangerous and the manufacturer can not be held responsible.Warning! This appliance must be

22Appliance ServicingCDA provide a quality and effective after-sales service to cover all your servicing needs. Please attach your receipt to this pag

23GuaranteeCDA appliances carry a five-year parts and a one-year labour guarantee. CDA will repair or replace any defect or part attributable to faulty

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00

3Important Safeguards and Recommendations– Do not carry out any cleaning or maintenance without first disconnecting the appliance from t

4Features and Technical DataCooking Points1. Auxiliary burner (A) - 1,00 kW2. Semi-rapid burner (SR) - 1,75 kW3. Rapid burner (R) - 3,00 kW4. Tripl

5How to Use the HobGas Burners Gas flow to the burners is adjusted by turning the knobs (illustrated in fig.2) which control the valves.Turning the kn

6Lighting Gas BurnersIn order to light the burner, you must:1 – Press in the corresponding knob and turn counter-clockwise (fig. 3) to the full flame

7Choice of Burner The symbols printed on the panel by the side of the knob indicate which burner you are controlling.Choose a suitable burner dependin

8WRONG CORRECTWRONG CORRECTCorrect use of Triple-Ring BurnerThe flat-bottomed pans are to be placed directly onto the pan-support.To use the WOK you ne

9Cleaning and MaintenanceGeneral Tips– Before cleaning the hob switch it off and wait for it to cool down.– Clean with a cloth, hot water and soap or