CDA fwc603 Guía para resolver problemas descargar pdf (Pagina 7)

Care and Cleaning

Always disconnect the appliance from the mains electrical

supply before any cleaning or maintenance.

• Do not use abrasive products or detergents. After washing,

rinse and dry thoroughly.

• The exterior of the appliance and the door seal should be

cleaned using mild soapy water and dried thoroughly.

• The interior cabinet should be cleaned using a solution of

bicarbonate of soda and lukewarm water.

• Clean the shelves separately by hand using soap and water. Do

not put them in the dishwasher.

• Ensure that the cloth is only moist when cleaning the control

panel and electrical parts, and that all water is thoroughly dried

oefore reconnecting the power.

• Once cleaning is complete, reconnect the mains electrical

supply.

• If the appliance is not to be used for prolonged periods of

time, unplug and clean the appliance thoroughly. The door

should be left slightly ajar to prevent the formation of odours or

condensation.

Removing the shelves (fwc303/603/623)

To remove the shelves from the wine cooler, rst remove all bottles

from the shelf, then pull the shelf forwards until the groove on either

side of the shelf is level with the plastic peg on either side of the

cabinet (as shown in g 7). Then lift the shelf up and pull forwards.

To replace the shelves, follow the steps above in reverse order.

Temperature alarm

If the temperature rises or falls outside the set temperature range,

an alarm will sound and the display will ash.

• The wine cooler has not yet reached the set temperature (when

rst switched on)

• There has been a power failure

• The wine cooler has been overloaded

• The door is not closed properly

g. 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sin comentarios

CDA fwc603 Guía para resolver problemas Pagina 7