CDA FWV901 Guía para resolver problemas descargar pdf (Pagina 5)

Use and Controls

FWV901/FWV1201

To switch the power on/o

Press and hold the power button for ﬁve seconds.

To change the temperature

• Press the up or down buttons for the appropriate zone until the required temperature is shown on the display.

• The preset temperature is 10°C/50°F for upper zone and 16°C/60°F for lower zone.

• To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, press and hold the light

button for ﬁve seconds.

• To view the set temperature, touch the up or down button at any time and the set temperature will ﬂash in the LED

display for ﬁve seconds.

• The display shows the current internal temperatures when the wine cooler is on.

Optimal temperature selection

Whilst wine is best stored at temperatures between 13 and 15˚ C, your wine can also be stored at drinking temperature,

for red wine this is between 15 and 17˚ C, and for white wine between 12 and 13˚ C.

To use the internal light

• Press the light button to switch the light on or o.

Please note:

The temperature in the lower zone must be set either the same or higher than the temperature in the upper zone. For

optimal performance, the temperatures in the two zones should dier by at least 4˚ C.

Key:

1 – Power button

2 – Upper Zone, up button

3 – Upper Zone, down

button

4 – Lower Zone, up button

5 – Lower Zone, down

button

6 – Light button

7 – Upper Zone

8 – Lower Zone

1 2

ﬁg. 2

7 8

1 2 3 4 5 6 7 8 9 10 ... 15 16

Sin comentarios

CDA FWV901 Guía para resolver problemas Pagina 5