CDA hn9610 Especificaciones descargar pdf (Pagina 14)

• To pause the hob, touch the “Pause” key , the hob displays “11” in

all the zone displays.

• To restart cooking, touch the “Pause” key again.

Timer

The hob is equipped with a timer that allows ﬁnish times to be set for

the end of cooking on any combination of zones, between a minimum

of one minute and a maximum of 99 minutes. This timer can also be

used as a minute minder.

The timer display is surrounded by six indicators:

The middle front one represents the minute minder and the other ﬁve

are “Zone timer indicators”, representing the individual zones.

To set the timer

To set a nish time for a heating zone, rst it is necessary to turn on

that zone as above. Then:

• Touch both the timer “+” and “-” keys together. The timer control

light function will switch on.

• Touching both the timer “+” and “-” keys together again several

times will allow you to cycle through the available control areas (one

for each heating zone in use and the minute minder one).

• While one of the “Zone timer indicators” is ashing you can set the

timer for that zone using the “Timer keys”.

• Touch “+” repeatedly to start at 0 minutes and work upward,

note that it will scroll more quickly if you just hold your ﬁnger

on it.

• Alternatively, if you touch the “-” key rst the setting will start

at 30 minutes.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sin comentarios

CDA hn9610 Especificaciones Pagina 14