CDA RC 9020 Manual de usuario descargar pdf (Pagina 38)

Gas connection Cat: II 2H3+

The gas supply must use the nearest gas inlet pipe which is located at the left or the

right hand side at the rear of the appliance (figs. 36a, 37).

The hose should also be connected in such away that it does not touch the floor.

To screw the connecting tube operate with two spanners (fig.36b).

The unused end inlet pipe must be closed with the plug interposing the gasket.

After connecting to the mains, check that the coupling are correctly sealed,

using soapy solution, but never a flame.

Fig. 36a

Fig. 36b

1/2” BSP (male)

Left gas

inlet pipe

Right gas

inlet pipe

Plug

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 47 48

Sin comentarios

CDA RC 9020 Manual de usuario Pagina 38